Easy ECM – Easy to install. Easy to program.

The 0034e & 0034ePlus ECM High-Efficiency Circulators are high-performance, variable speed, wet-rotor circulators with high-efficiency ECM permanent magnet technology. Their variable speed performance curves are equivalent to the Taco 009, 0010, 0011, 0012, 0012 3-Speed, 0013, 0013 3-Speed & 0014. Ideal for large residential and light commercial hydronic heating, chilled water cooling and domestic hot water systems. The ECM technology reduces power consumption by up to 85% compared to equivalent AC permanent split capacitor circulators. The 0034e comes with an easy-to-use dial while the 0034ePlus has an intuitive digital user interface.

Application:

Maximum of 34 feet of head and 50 gpm
Maximum operating pressure:150 psi (10.3 bar)
Minimum NPSHR:18 psi at 203˚F (95˚C)
Maximum fluid temperature: 230°F (110˚C)
Minimum fluid temperature: 14°F (-10˚C)
Electrical specifications:
- Voltage: 115/208/230V, 50/60 Hz, single phase
- Maximum operating power: 170W
- Maximum amp rating: 1.48 (115V) / .70 (230V)
Equipped with a cast iron or stainless steel casing
Stainless Steel model suitable for open loop potable water systems
Taco circulators are for indoor use only
Acceptable for use with water or maximum of 50% water/glycol solution

Features:

Simple 3-button control
Digital LED screen displays; Watts, GPM, Head, RPM and diagnostic error codes
Five operating modes to match any system requirements — activeADAPT™, Constant Pressure, Proportional Pressure, Min/Max Fixed Speed or speed control through 0-10V DC or PWM external input
BIO Barrier protects the pump from system contaminants
SureStart automatic unblocking and air purging mode
Replaces all single speed and 3-speed circulators in its class
Use with a Taco ZVC Zone Valve Control or SR Switching Relay for ON/OFF operation
Nut-grabber feature on flanges for easier fit-up
Dual electrical knockouts and removable quick-connect terminal strip for easy wiring
Double insulated
Whisper quiet operation
Rotatable control cover to simplify installation

Specifications

Connection: Rotated Flange
Volts: 115 / 208 / 230
Hertz: 50/60
Phases: 1
Max Amps: 1.48
Watts: 10 - 170
RPM: 830 - 4,300
Maximum Flow: 50 GPM
Casing: Cast Iron
Stator Housing: Composite
Control Base: Composite
Cartridge: Composite
Impeller: Composite
Shaft: Ceramic
Bearings: Ceramic
Thrust Bearing: Carbon
O-Ring & Gaskets: EPDM

PKZ1900116

Collection: 30.1 to 35.0

Filter products

Type

Category

Brand

Pump Casing Material

Pump Max Flow (GPM)

Pump Max Head (Ft)

Pump Speeds

Price

0034ePlus - ECM High-Efficiency Circulator - Cast Iron - 50 GPM - Rotated Flange