Pasco 9046 Pipe Wrap Primer - Quart - 125 Square Feet Coverage

Features

PASCO Pipe Primer is a quick drying rubber base primer that permeates pits and irregularities on the pipe surface and prepares the metal for tape application.
PASCO Pipe Primer is made to be compatible with the adhesives on PASCO Pipe Protection Tape.
PASCO Pipe Primer is easily brushed on the pipe and fittings. The application of the primer enhances the surface preparation and adds strength adhesion at low cost.
Pint and quart sizes with dauber.

Application Directions

Surfaces to be wrapped must be clean and dry. Any oil or grease must be removed.
Any burrs or sharp edges must be removed or smoothed.
Before tape application, all bare pipe and fittings to be wrapped must be coated with PASCO PIPE PRIMER.
Weld beads shall be covered with one wrap or layer of tape prior to spiral wrapping.
Tape shall be spirally wrapped the length of the pipe using one half lap for double thickness or 1/2" overlap, depending on the individual installation.
When pipe is mill coated, tape must be used on the fittings and joints. To wrap a joint, first coat joint with primer. Joint shall be wrapped with tape spirally beginning on the mill coating 3" from joint. Cover joint and end tape on mill coating 3" past joint

^PUZ1201330

Collection: View All Chemicals & Compounds